picodual

Eleaf Pico Dual Mod

item# N/A Categories: , .

Price : $32.99

Earn up to 33 Points.

Clear

Product Description

Eleaf Pico Dual Mod


Eleaf Pico Dual Mod is the evolution of the critically acclaimed and Jay Bo designed Pico platform, retaining the core design language while expanding the chassis to accommodate two high amperage 18650 batteries as well as updating the output to a maximum of 200W. With a curved triangular shaped chassis, the Pico Dual maintains the ergonomic and comfortable shaping of the previous generation Pico systems while expanding the chassis size and method of battery insertion to accommodate two high amperage 18650 batteries (sold separately). The Pico Dual features the newest Eleaf output technology, capable of outputting 1 to 200W with a maximum of 50A, with firmware upgradeability planned for the future. Eleaf has also revised the Buck-Boost output for a more efficient, consistent, and accurate output, while implementing Preheat Functionality for additional customization. Full temperature control capability is also onboard, with native support for the the three traditional TC heating elements alongside a three memory TCR mode.

Eleaf Pico Dual Features:

  • 1 to 200W Output
    • 0.1 to 3.5 ohm Atomizer Resistance Range
    • 0.5 to 9V Output Voltage
    • 50A Maximum Output Current
    • Firmware Upgradeable
    • Improved Buck-Boost Technology
      • Steadier and More Consistent Output
  • Temperature Control Suite
    • Ni200 Nickel Support
    • Titanium Support
    • Stainless Steel Support
    • Three Memory TCR Mode
      • Set Own Temperature Coefficient of Resistance
      • Fine Tune Output
    • Preheat Functionality
    • 0.05 to 1.5 ohm Atomizer Resistance Range
    • Resistance Lock
    • 200 to 600 degrees Fahrenheit Range
  • Updated OLED Screen
    • Four Switchable Display Interfaces
      • Voltage Based Display
      • Simplified Interface
      • Total Vaping Seconds
      • Total Puffs
  • Dual High Amperage 18650 Battery Powered
    • Bottom Loaded
    • Flip Open Cover
    • Run in Series
    • Batteries Sold Separately
  • Advanced Cell Balancing Trickle Charge System
    • Ensures Equal and Efficient Charging to Both Cells
    • 1.5A Avatar Quick Charge Compatible
    • Reverse Charging Adapter
      • Screws into 510
      • Converts to Powerbank
  • Pico Three Button Control Interface
    • Oversized Firing Button
    • Bottom Mounted Adjustment Switches
  • Zinc Alloy Chassis
  • 25mm 510 Diameter
    • Stainless Steel 510
    • Gold Plated Spring Loaded Contact
  • Dual Circuit and Reverse Polarity Protection

    • Li-ion Batteries may explode if you do not charge or discharge them properly. Please note that due to their inherent safety, IMR cells don’t have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum charge voltage is 4.25 volts.
    • Users must have knowledge on how to charge and discharge Li-ion batteries before making Li-ion Battery Packs. We are NOT responsible for any damage that is caused by the misuse of Li-ion Batteries.
    • Not a protected battery.

    DO NOT STACK BATTERIES. DO NOT INSTALL BATTERIES WITH ANY FORCE. If casing is cut, discard battery.

    This Type of Product is Designed for Veteran Vapers Only!

    We Are NOT Responsible for ANY Misuse of Devices.

    Including Batteries, Atomizers, and MODs.

    These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.

    • Warranty Information:The Pico Dual Mod will include a 30 day Limited Warranty against any manufacturer’s defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.