mini-protank-3

KangerTech Mini Protank 3 Bottom Dual Coil Pyrex Glass Clearomizer 1.5ml

Categories: , .
Purchase this product now and earn 8 Points!

$7.99

Out of stock

Product Description

KangerTech Mini Protank 3 Bottom Dual Coil Pyrex Glass Clearomizer 1.5ml – Clear Color

Product Introduction

New version of KangerTech Protank – Mini Protank 3 Clearomizer.

Parameters

Resistance: 1.5 +/- 0.2ohm
Length: 72.5mm
Diameter: 14.1mm

This product comes with

  • 1 X Stainless Drip tip
  • 1 X Pyrex Glass tube
  • 1 X Bottom connector ring
  • 1 X Dual Coil unit, 1pc 1.5ohm
  • 1 X Connector base

Simple packing. Customary Packing from the factory,the packing is subject to change without notice.

Features

  1. Bottom Filling
  2. Bottom Heating
  3. Pure taste
  4. More vapor
  5. All are Replaceable! Glue-free.
  6. Pyrex Glass Tube
KangerTech Mini Protank 3 Bottom Dual Coil Pyrex Glass Clearomizer 1.5ml

How to use? 

1. Turn upside down the cartomizer, then screw off the connector.

2. Use the syringer or dropper to fill less than 1.5ml e-liquid. Do not overfill it.

3. Carefully screw on the connector, connect it with the battery and enjoy it.

KangerTech Mini Protank 3 Bottom Dual Coil Pyrex Glass Clearomizer 1.5ml
How to replace the coil unit/coil head?
Turn upside down the cartomizer, then screw off the connector. Take out the old coil unit from the bottom base, replace with new one. So easy!

KangerTech Mini Protank 3 Bottom Dual Coil Pyrex Glass Clearomizer 1.5ml

How to remove your BCC cartomizer from battery?
Hold the bottom of the clear cartomizer when you separate it from battery MOD. Please do not screw the cartomizer from the top or middle of the cartomizer, just in case the e-liquid pour out.

Tips:

1. Make sure the cartomizer should be screwed back tightly onto the Joye eGo/eGo-T/eGo-C/eGo-C Twist/510 battery.
2. Please be sure that the coil unit is screwed into the cartomizer tightly. If you get few vapor when you use, try to make the clear cartomizer upside down to let the fibre wick and coil get e-liquid, which are on the top of the cartomizer.
3. When the cartomizer does not perform well or stops working due to heavy use, just replace the coil unit with a new one, you will get a new cartomizer!


KangerTech Mini Protank 3 Bottom Dual Coil Pyrex Glass Clearomizer 1.5ml