Kangertech TOPTANK Nano SSOCC Pyrex Glass Cartomizer
Kangertech Toptank Nano Product Introduction
Kangertech TOPTANK Nano SSOCC Pyrex Glass Cartomizer, comes with stainless steel organic cotton coil, which is much healthy and environmental.
Kanger Toptank Nano, similar to the Subtank Nano, except now it features top filling capabilities. It comes in three colors - pink, purple, and black - to match the Topbox Nano Kits colors. To fill, you can unscrew it at the top or the bottom of the unit. The Toptank is constructed of Pyrex and stainless steel. Toptank Nano also includes adjustable airflow. The Kit comes with a 0.5 SSOCC coil as well as a spare 1.2 ohm coil and a replacement glass.
Size: 18.5(D)x 44(L)mm
Material: Pyrex Glass And SS
Toptank Nano comes with
- 1 x TOPTANK Nano
- 1 x SSOCC 1.2ohm
- 1 x SSOCC 0.5 subohm
- 1 x Extra Pyrex Glass Tube
- 1 x Manual
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
You can rotate the bottom ring to increase/ decrease the airflow.
Top filling: Place the tank in vertical with drip tip on top. Unscrew the top cover anticlockwise. Fill the tank but ensure the e-juice below the middle stem and no e-juice into it. Caution: Once open the top cover, immediately fill the e-juice as fast as possible. Ensure the top cover is screw tightly whenever juice is inside the tank. It's a bottom filling tank, too.
Changing OCC: When flavor and /or vapor are reduced, it's time to change the atomizer head. To replace the atomizer, remove the tank from a battery and turn the tank upside down; unscrew the airflow base and carefully set the tank aside; unscrew the atomizer unit counterclockwise; once disassemble, discard the used head and replace a new SSOCC head; screw the new head clockwise into the air base. After filling e-juice, you can connect it with the battery and begin to vape.