SMOK TFV4 Mini Tank Kit
The Smok TFV4 Mini tank kit is the 3.5ml version of the Smok TFV4. The full kit includes extra coil heads and accessories, everything you need to get the maximum usage out of the newest sub ohm tank from one of the most trusted brands in vaping, Smok.
The TFV4 Mini is a compact, 510 threaded, 22mm tank. The common sizing makes it a great match for a wide range of mods. “TF” stands for “Taste Furious”, and the TFV4 aims to bring you the best in sub ohm vaping experience. With its temperature sensing, clapton coils, and improved airflow, you will love the TFV4 tank.
Another feature of the TFV4 tank is a simple to use top fill mechanism. The double layered drip tip insulates against heat and cools the vapor coming to your mouth.
What is Included:
The full TFV4 kit comes with the TFV4 Mini Tank (with 0.35ohm TF-CLP2 coil). Also included are 2 additional coil heads, the 0.4ohm TF-S6 coil head (suitable for 30W-100W) and the TF-RCA coil head, a rebuildable head with clapton coil pre-threaded into the posts. All coil heads are wicked with 100% Organic Cotton. You will also get a spare glass tube, and the following accessories:
- 2 x Black sealing pads (A and B type)
- 2 x Top Cap sealing pad
- 1 x Small airflow tip
- 1 x Airflow slot sealing ring
- 2 x Silicone bands (1 Black, 1 Red)
- 2 x Drip tip O-ring
- 1 x Tiny Screwdriver
- 1 x Japanese cotton pad
- 1 x Heating coil (clapton)
- 1 x Airflow tube O-ring
- 1 x e-liquid filling instruction card
How to Fill the SMOK TFV4 Mini:
While holding your tank with one hand, use the other hand to twist the top cap counterclockwise.
Add e-liquid through the wide side slot. Do not drip down into the center tube.
Firmly and carefully close the cap. As with other tanks that use the organic cotton, wait for several minutes to all the cotton to completely saturate in order to avoid burning the cotton.
How to Build the RBA:
With clean hands, take the RBA apart.
Install and position the pre-wrapped coil by placing the coil between the posts and wrapping the ends around the screws.
Tighten the screws and make sure the coil is found in the center and lined up with the air hole. Make sure the coil is not touching the base.
Cut the ends of the wire off.
Cut a strip of cotton and insert the cotton through the coil.
Cut the cotton to size at an angle to ensure that it is not too short or too long for the unit.
All is left is to saturate the wick with eliquid and you are ready to vape!