Wismec Presa 75W TC Mod Product Introduction
WISMEC Presa 75W TC MOD W/O Battery, inherited the unique appearance of the first generation or Presa, and now comes with upgrades such as increased wattage and temperature control. The first Wismec Presa was a great little device capable of 40 watts. The new 75W Presa TC is introduced with max 75W output and brilliant temperature control system. It supports VW, Bypass, TC-Ni and TC-Ti modes, which will provide you with various vaping experiences. In addition to the replaceable single 18650 cell (not included) and magnetic cover, the upgradable firmware keep the device up to date. This device has a power range of 1 watt to 75 watts and will fire down to 0.1ohms. In temperature control mode it has a range of 200°F to 600°F and will fire down to 0.05ohms. A neat feature of the Wismec Presa 75W is that the entire front of the device is the fire button, which can be locked by flipping the little switch at the top. The battery is accessed via the back magnetic door for easily switching out the battery.
Size (H*L*W): 85 x 39 x 23 mm
Color: Silver, Black
Battery Cell: 18650 batteries (Not INCLUDED)
Rated Output Wattage: 1W – 75W
Rated Resistance Range:
0.05-1.0ohm for TC mode
0.1-3.5ohm for VW/ Bypass mode
Temperature Range: 100-315°C/ 200-600°F
It comes with
- 1 x 75W Presa TC Mod
- 1 x Manual
- Temperature Protection
- Over 10s Protection
- Atomizer Short-circuit Protection
- Low-voltage Protection
- Atomizer Low Alert
- Low Power Alert
Power on and off: Move the lock switch to left side, then click fire button 5 times continuously to turn the device on and off.
Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will allow you to switch between the Stealth on and off function.
Key Lock function: While the device is on, simultaneously hold the 2 regulatory buttons. This will allow to switch between Key on and off function.
Safety Lock switch: Move the lock switch right/ left to lock/ unlock the fire button.
Switch the display Mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the display will rotate 180 degrees.
Shift between VW/Bypass/ TC-Ni/ TC-Ti mode: Press the fire button 3 times, the first row will flash to indicate you entering the menu. Press the right button to switch between VW, Bypass, TC-Ni, TC- Ti modes.
How to charge: You can take out the lithium-battery from the device and then charge the cell itself. Moreover, it can also be charged via USB cable.
- 510 threaded
- No cartomizer/tank included.
- There is CE mark on mod end.
- 18650 Batteries not included.
**** THIS MOD REQUIRES AN EXTERNAL 18650 BATTERY****
The Wismec Presa 75W will include a 30 day Limited Warranty against any manufacturer’s defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.